Using SketchUp? AutoRamp for SketchUp ›
Parking ramps
from a few numbers.
Enter a radius and a story height. Get the slab, curbs and support beams.
Pick a start line.
Sample model.3dm
곡선직선연결 램프
배치 기준선
모델 원점
시작선 선택시작선 선택
시작선을 고르지 않으면 원점에 생성합니다.
시작선 기준시작선 3500.00 mm
시작선 기준시작선 3500.00 mm
곡선 mm
내부 반경45004500
스윕 각도 (°)360360
회전 방향반시계시계
단면 mm
램프 너비3500
연석 너비200
구조 슬래브250
층고33003300
검토
모드곡선
길이 (run)39,269.91 mm
경사8.40 %8.40 %
법정 / 유효 한도14.00 / 9.00 %
적합적합
생성 중…램프를 생성했습니다. 경사 8.40 %.
램프 생성램프 생성
Sample model.3dm
곡선직선연결 램프
배치 기준선
시작선 기준
시작선 선택시작선 3500.00 mm
연결 구간 + 층 세트
B1층고 3300여유 부족
곡선 180° · 내부 반경 4500
직선 12000
B2층고 3300여유 부족
곡선 180° · 내부 반경 4500
직선 12000
검토
모드연결 램프
길이 (run)31,634.95 mm
경사10.43 %
법정 / 유효 한도14.00 / 9.00 %
여유 부족
램프를 생성했습니다. 경사 10.43 %.
램프 생성
AutoRamp
One Rhino 8 plug-in.
Curved · Straight · Linked
CurvedStraightLinked
Slope checked as you type
OKLow marginOver limit
Support beams and a 2D plan
Support beams2D structural plan
Tells you about new versions
Just a radius and a story height.A separate layer for each part.One undo puts it back.
Download
AutoRamp 0.1.0
· First release- autoramp-0.1.0-rh8_18-any.yakRhino 8 package · 44.7 KB
-
Rhino
Rhino 8 SR18 or later · Windows
- Drag the downloaded
.yakfile onto the Rhino window (or searchPackageManagerforautorampand install) - Restart Rhino
- Run the
AutoRampcommand → dialog
No toolbar yet: open it by its command name
- Drag the downloaded
Good to know.
How slope is rated 3
- Slope = story height ÷ ramp length
- Default legal limits (Korea): straight 17 %, curved 14 %
- Within 5 %p of the limit: low margin
Known limits 5
- Once built, the ramp is no longer tied to the dialog
- No transition slopes at the ends
- Support beams have one rectangular section
- The 2D plan is lines only (no dimensions or text)
- Check which legal limits apply to your project
Tested on 3
- Rhino 8.35 · WindowsTested
- Rhino 9Not tested
- MacNot tested